mackstwgns
New member
I designed and 3d printed a solution to the California gas nozzles and filling my motorcycle tank. I get a full tank of gas and don't have to hold the accordion sealing ring back to get the nozzle to work right. I just stick the nozzle into my filler adapter and push it down (still have to hold it) and fill. No more gas fumes, no more gas on my gloves and it fills right up to the top of the tank. I carry this in my tank bag. They are about 3" in diameter and 2-3" tall., so its going to be big in the pocket of your jacket.
Right now i have the designs for the following motorcycles, and have printed a few of these to test out. I print them in yellow PETG, so you remember its on your gas tank, but I can print them in other colors if you want. Ask me about a specific colors to see if i have it.
They are embossed with the motorcycle model, so you don't forget which one fits which of your extensive collection:
Honda metropolitan scooter 2013-2014 version
1983-84 Honda VT500FT Ascot (shown in White)
1995-current Suzuki DR650 stock gas tank (yellow one shown on the black dr650 stock tank)
Acerbis big rotomolded tank (specifically I have the 5.3 for the DR650, but any Acerbis with their standard cap should work the same), should also fit the IMS tanks since it uses the same(?) Cap. If you have one, let's do a test fit.
Triump Tiger 900 (CAD image)
1986 Yamaha SRX 600 with the 7 bolt flat recessed gas cap . (Spacer shown in white). This should also work for the SRX250, Radian, YSR50(?), YZF600, YFZ1000, XJ600, FZ600, FZ700, FZ750,.... any that use that same cap (see that pciture).
I have access to the Honda FT500 gas tank, the Yamaha XT350 gas tank, honda CX500T (should fit the CX650T), and Suzuki GN400 tank so I can design those.
Beyond that, I'd need to make some measurements from your gas tank to make one of these. Some are simple to design, and some, like the tiger take a bit more design. (see image).
$15 plus shipping. Paypal. Possibly meet in Hayward or Campbell/LG/SJ.
Right now i have the designs for the following motorcycles, and have printed a few of these to test out. I print them in yellow PETG, so you remember its on your gas tank, but I can print them in other colors if you want. Ask me about a specific colors to see if i have it.
They are embossed with the motorcycle model, so you don't forget which one fits which of your extensive collection:
Honda metropolitan scooter 2013-2014 version
1983-84 Honda VT500FT Ascot (shown in White)
1995-current Suzuki DR650 stock gas tank (yellow one shown on the black dr650 stock tank)
Acerbis big rotomolded tank (specifically I have the 5.3 for the DR650, but any Acerbis with their standard cap should work the same), should also fit the IMS tanks since it uses the same(?) Cap. If you have one, let's do a test fit.
Triump Tiger 900 (CAD image)
1986 Yamaha SRX 600 with the 7 bolt flat recessed gas cap . (Spacer shown in white). This should also work for the SRX250, Radian, YSR50(?), YZF600, YFZ1000, XJ600, FZ600, FZ700, FZ750,.... any that use that same cap (see that pciture).
I have access to the Honda FT500 gas tank, the Yamaha XT350 gas tank, honda CX500T (should fit the CX650T), and Suzuki GN400 tank so I can design those.
Beyond that, I'd need to make some measurements from your gas tank to make one of these. Some are simple to design, and some, like the tiger take a bit more design. (see image).
$15 plus shipping. Paypal. Possibly meet in Hayward or Campbell/LG/SJ.
