• There has been a recent cluster of spammers accessing BARFer accounts and posting spam. To safeguard your account, please consider changing your password. It would be even better to take the additional step of enabling 2 Factor Authentication (2FA) on your BARF account. Read more here.

What have you made lately?

The "VAZ" stand is sitting on my dining table. I ripped the 2x6 redwood boards down to 2x5 for the 6 piece perimeter base then screwed (counter sunk and plugged) the top to the base. The top overhangs the base by 3/8".
Correct, plywood veneer banding.
.
Vase Stand Corner Plugs.jpg
 
I make so much stuff I lose track. Needed a new bed but beds are garbage off the rack. And very few could house 12 plastic bins underneath with no supports. Recycled Doug fir legs, pine frame, oak cross members. I can stand on the middle with no deflection. Solved.
I bought a recycled euc slab for a table and bench. The old round table was wasting precious corner space. The X table legs got binned for smaller ones. I’ll repurpose the legs for an outdoor picnic table.
Even though the slab was kiln dried it cupped pretty hard, so there was a second shaping. Eucalyptus is brutal to shape and finish. Bulletproof once finished though…
IMG_5011.jpeg
IMG_9736.jpeg
IMG_9706.jpeg
IMG_9670.jpeg
 
those huge granite inspection plates are CHEAP on the used market... relatively. painfully expensive when you need a new one but nobody wants them when you need to get rid of it. I have to build a garage in the next year or 2 and i'm keeping an eye out to inset one into the floor because fucking why not?

example 5feet x 8 feet for $850 (transportation etcetc blah)

 
I wonder if those used one are too far out of calibration to be brought back into spec in a cost effective way. They are far from indestructible when you need them flat within an RCH. There are grades. Garage floor grade is pretty wide open though lol
 
Might as well use a tape measure if RCH is your tolerance

I expect the could be brought back in tolerance but probably not worth it by the time shipping and machining and lost productivity are factored in.
For a garage floor it can have divots missing :laughing
 
I imagine that was some cycle time.
.060” ball tool for the nip to webbing radius. 9800 Rpm with a .003” stepover. 14 ipm.

.125” ball mill on the webbing. 9500 Rpm with a .005” stepover and 40 ipm.

26 hrs cycle time on the finish. I was pretty happy with the results. We run no coolant but I dis use an MQL oil blaster. The part is a mold insert so the goal is to help the polishers out as much as possible.
 
Might as well use a tape measure if RCH is your tolerance

I expect the could be brought back in tolerance but probably not worth it by the time shipping and machining and lost productivity are factored in.
For a garage floor it can have divots missing :laughing
there are companies that can lap and calibrate on site. I picked up a nice grade A 36 by 48 with rolling stand for 200
 
What is the "big plate of nipples" intended use?
IMG_7424.jpeg

This is the pattern it will be paired with. It will create the dimples you see here. I think i just finished making a riot shield for dogs. ;)

Eventually we will mold parts that look like this pattern i made. The plate-o-nipples will be incorporated into the mold (we call the finished molds “tools”) we will mold, hand finish paint and assemble these doggie riot shileds complete to the customer. Manufactured start to finish here in Santa Cruz. :flag
 
The process im describing is really hard to understand until you see it. The acrylic pattern i make is a representation of the parts that will be molded. The acrylic pattern is basically disposable. Once the mold is created, the pattern is no longer used. The aluminum however will live on imbedded into the mold and all the parts that we mold will make contact with the aluminum. We do a type of molding known as “RIM” Reaction. Injection. Molding. Other companies do RIM molding but, our process to create molds is our own.
 
Looks cool.

Alchoholica... love it..! :laughing
 
Back
Top