• There has been a recent cluster of spammers accessing BARFer accounts and posting spam. To safeguard your account, please consider changing your password. It would be even better to take the additional step of enabling 2 Factor Authentication (2FA) on your BARF account. Read more here.

Daily carry knife?

So, separately from places to buy...

Are you saying that you have multiples of the same model knife that substantially different in quality or are you saying that various models from the same brand have different qualities? (Or something else)

I'm saying exactly that. I had a Japanese Vapor that I paid full price for ($>100) and carrier it everywhere for a few years. I lost it, and replaced it with another Vapor from China at about 1/3 the price. It was also a great knife, but the edge was weaker and it even developed a few light rust spots.
 
Not a good everyday knife but I carry this on my job. IMO, it's a great defensive knife.

C12G_L.jpg

a Harpy. the Lecter special..
 
I like the Leatherman Skeletool. I don't EDC, just days when I'm working. It's a nice compromise for me. I use the pliers and knife most often in a multitool, followed by the screwdrivers. I don't necessarily need to carry around everything else. Any smaller and the handle would be too small, any bigger and it'd be unpocketable and heavy. One downside is the handle isn't necessarily comfortable.

The knife is good, can be accessed without opening the tool, and I have pliers and a screwdriver if I need it. The most important part for me is that it has a carabiner hook, so I can clip it to things (I don't usually take it up in the air, but if I needed to, I could).
 
CRKT M16-14T. Excellent knife. I use it daily to cut/pry/poke. Daily carry, camping, travelling. Fits in my pocket but just barely. Very good steel. Titanium frame. One handed opening. Highly recommend.
 
Benchmade Osborne. Not a lot out there for us lefties so I learned to love the axis lock. It's also slim and comfortable which has made it easy to remember to bring pretty much always.

Bought this knife for myself when I got my first EMT job in 2003 and it's been my daily carry and duty knife ever since:

2015-11-22%2002.38.40.jpg
 
I'm saying exactly that. I had a Japanese Vapor that I paid full price for ($>100) and carrier it everywhere for a few years. I lost it, and replaced it with another Vapor from China at about 1/3 the price. It was also a great knife, but the edge was weaker and it even developed a few light rust spots.

Got it. You're trying to say the first of my two options.

Thanks. I didn't know that. I assumed Kershaw was pretty stable and was getting consistent products made.
 
Got it. You're trying to say the first of my two options.

Thanks. I didn't know that. I assumed Kershaw was pretty stable and was getting consistent products made.

I'm happy with my knives, but you can check the blade steel against this.

BTW, my most recent Kershaw uses 8Cr13MoV, and I am very happy for a knife that is MSRP $55 but I bought for half-price:

The MoV (or Cr) series of steels originate from China and comparable to AUS-8 but containing slightly higher carbon content. You typically get great value for money with this steel and good manufacturers like Spyderco have mastered the heat treatment process to bring out its best.

http://bestpocketknifetoday.com/discovering-the-best-knife-steel/
 
I carry a cheapo Smith and Wesson folder. It was the cheapest and sturdiest knife I could find. I use it more as a pry tool than a knife.
 
I've owned dozens and dozens of folders from many manufacturers.

My opinion: Nothing beats a Spyderco and the Spyderco Sage 1 gets pretty close to perfection.

I carry one everyday.
 
Got my knives in and I'll be returning the Hammond. It's WAY too thick and heavy.

The small M16 will now be my carry.



 
I carry a cheapo Smith and Wesson folder. It was the cheapest and sturdiest knife I could find. I use it more as a pry tool than a knife.

I like S&W knives as throw away knives. They're really cheap so I don't really care if it gets damaged or lost. My biggest problem with S&W knives have always been the screws falling off and getting lost :mad. Applying loctite to some of the screws helps sometimes.
 
I carry an M16 almost daily. Nice little knife with decent but not excellent steel. Depending on use, the edge needs a touch-up every now and then. The flipper can get sticky if you don't keep the pivot clean.

I got my first m16 over 10 years ago and really like em. Knife cost me $35, less than stellar steel is okay by me. I could toss the knife every 3 months, buy a new one, and still come in under the cost of a single Benchmade.


I think this will be my 6th M16.
 
Well, yes because it is one of the tools in the multi tool, in the folding kit.

There is also scissors, and finger nail cleaner/file, and screw drivers.

I wouldn't try to go through airport security. though.
 
Ok just got the CRKT M16 and it's perfect, exactly what I wanted. I have large hands and it's certainly not made for someone with dainty hands...it's got some heft, and the locking and opening mechanisms are great. The assisted open opens with a solid click, and it was only $35!
 
I got these last week and I'm not sure which one to keep as a "daily carry"

The small one's great for daily use but it's small, like hard to open and use small. The larger one might be overkill but it's still slim and comfortable. Just a little to much blade.

I don't need both so keep the lil' Chive or the larger Onion Leek?
 

Attachments

  • KershawOpen.jpg
    KershawOpen.jpg
    91.8 KB · Views: 94
I got these last week and I'm not sure which one to keep as a "daily carry"

The small one's great for daily use but it's small, like hard to open and use small. The larger one might be overkill but it's still slim and comfortable. Just a little to much blade.

I don't need both so keep the lil' Chive or the larger Onion Leek?

Keep the Leek.

The pronounced recurve on the Chive's blade will complicate stropping and sharpening. The little Chive may appear more like a friendly "office knife," but if its small size makes you fumble around with it when you handle it, that office-friendly appearance is negated by looking like you may have an accident. Keep the one that you can easily handle and sharpen.

Plus, you may find instances where you want that extra blade length. 1.5" is probably more than enough for 90% of tasks, but if you end up having to break down boxes or cut food, you'll want that extra length. I think 3-3.5" is the ideal EDC size.
 
Back
Top